show hnbgw

show hnbgw

This chapter includes the show hnbgw command output tables.

show hnbgw counters

show hnbgw counters Command Output Descriptions

Field

Description

Number of registered UEs

The total number of User Equipment devices registered with the HNB-GW.

Number of UEs with IuPS connection

The total number of User Equipment devices that have established a connection with the Packet Switched network.

Number of UEs with IuCS connection

The total number of User Equipment devices that have established a connection with the Circuit Switched network

Number of UEs with IuPS and IuCS connection

The total number of User Equipment devices that have established connections to both the Packet Switched and Circuit Switched networks.

Number of Idle UEs

The total number of User Equipment devices that have no active connections to either the Packet Switched or Circuit Switched networks.

‌

show hnbgw counters hnbgw-service

show hnbgw counters hnbgw-serivce Command Output Descriptions

Field

Description

HNBGW Service

The name that identifies this HNB-GW service.

Number of registered HNBs

The total number of HNB devices registered with this HNB-GW service.

Number of registered UEs

The total number of User Equipment devices registered with this HNB-GW service.

Number of UEs with IuPS connection

The total number of User Equipment devices that have a Packet Switched network connection to a SGSN via this HNB-GW service.

Number of UEs with IuCS connection

The total number of User Equipment devices that have established a Circuit Switched network connection to a MSC via this HNB-GW service.

Number of UEs with IuPS and IuCS connection

The total number of User Equipment devices that have established Packet Switched (SGSN) and Circuit Switched (MSC) network connections via this HNB-GW service.

Number of Idle UEs

The total number of User Equipment devices that do not have an active connection to a Packet Switched (SGSN) or Circuit Switched (MSC) network.

‌

show hnbgw counters hnbid

show hnbgw counters hnbid Command Output Descriptions

Field

Description

HNB Id

The HNB device ID sent to the HNB-GW during registration.

Number of registered UEs

The number of User Equipment devices that have registered with this HNB.

Number of UEs with IuPS connection

The number of User Equipment devices that have established a connection to a SGSN via the Packet Switched network.

Number of UEs with IuCS connection

The number of User Equipment devices that have established a connection to a MSC via the Circuit Switched network.

Number of UEs with IuPS and IuCS connection

The number of User Equipment devices that have established connections to an MSC via the Circuit Switched interface and an SGSN via the Packet Switched network.

Number of Idle UEs

The number of User Equipment devices that do not have an active connection to Packet Switched (SGSN) or Circuit Switched (MSC) networks.

‌

show hnbgw-service

show hnbgw-serivce all Command Output Descriptions

Field

Description

Service name

The name used to identify the HNB-GW service to the system.

Context name

The name of the system context in which the HNB-GW service is defined.

SCTP IP Address

The IP address used to transmit SCTP messages from HNBs to the HNB-GW.

SCTPPort

The HNB-GW uses this port to listen for SCTP messages from HNBs.

GTP-U Service

The defined GTP-U service name(s) associated with the HNB-GW service in a Packet Switched network instance. The GTP-U service(s) are used for GTP-U tunneling towards the HNB-GW access network.

RTP IP Address

This is the IP address used in the RAB request by the HNB-GW as the transport layer endpoint. The HNB will send RTP data (packetized voice) to this IP address.

RTPPort Min

The lesser of two port numbers that define the RTP port range used in the binding-id in the RAB request sent to the HNB by the HNB-GW during voice call setup.

RTPPort Max

The greater of two port numbers that define the RTP port range used in the binding-id in the RAB request sent to the HNB by the HNB-GW during voice call setup.

RTP MUX

Indicates if RTP multiplexing is enabled or disabled. If enabled, multiple subscriber voice packets can be multiplexed and sent as one RTP packet towards the HNB-GW. This is explicitly negotiated between the HNB and the HNB-GW during HNB Registration.

HNBGW Initiated Ranap Reset

Indicates if the HNB-GW Initiated RANAP Reset function is enabled or disabled.

Ranap Reset Ack Timer

The timer value, in seconds, that defines how long the HNB-GW waits for a RESET ACK message from the SGSN or MSC after transmitting a RESET message. This setting is used only if the HNBGW Initiated RANAP Reset function is enabled.

Ranap Reset Maximum Retransmissions

Sets the maximum number of retries allowed for the HNB-GW to transmit a RANAP RESET message to the SGSN or MSC if the RESET ACK timer expires. This setting is used only if the HNBGW Initiated RANAP Reset function is enabled.

Ranap Reset Guard Timer

The timer that the HNB-GW starts after receiving a RESET message from the core network. While this timer is running, the HNB-GW discards any new RESET messages that it receives.

Available Radio Network PLMN

The Public Land Mobile Network ID configured for this HNB-GW service. It consists of the MCC and MNC (see below).

MCC

The Mobile Country Code defined for use with this HNB-GW service. It consists of the first 3 digits of the Available Radio Network PLMN ID.

MNC

The Mobile Network Code defined for use with this HNB-GW service. It consists of the last 3 digits of the Available Radio Network PLMN ID.

RNC-Id

The Radio Network Controller ID provided to HNBs for use by the core network for this HNB-GW service. It is configured under the PLMN-ID

Lac

The defined Location Area Identifier provided to HNBs during registration with this HNB-GW service. The LAC signifies which location area this HNBGW service belongs to, and is configured under the PLMN-ID.

Rac

The Routing Area Identifier provided to HNBs during registration with this HNB-GW service. The RAC signifies the routing area that this HNBGW service belongs to and is configured under the PLMN-ID

PS Network Name

The PS-network to be used for selecting the packet-switched core-network (i.e., SGSN) and its point-code.

CS Network Name

The CS-network to be used for selecting circuit-switched core-network (i.e., MSC) and its point-code.

Service Status

The current operating status of this HNB-GW service. If the status does not read ‘enabled’ HNB-GW functionality is not available.

Security GW service Address

The IP address of the HNB-Security Gateway associated with this HNB-GW service. Security Gateway configurations are used when the IPsec GW is co-located with the HNB-GW service on the ASR 5000. If the services are co-located, the SeGW IP address will be used as the IPsec tunnel endpoint by HNBs.

Crypto-template

Specifies the Crypto-Map template being used by the HNB-GW service for secure IPsec IKEv2 tunneling for the configured Iuh (HNB to HNB-GW) interface. The Crypto-Map template is used only if the HNB-GW and SeGW are co-located on the ASR 5000.

‌

Cisco Systems Inc.

Tel: 408-526-4000

Fax: 408-527-0883

Field	Description
Number of registered UEs	The total number of User Equipment devices registered with the HNB-GW.
Number of UEs with IuPS connection	The total number of User Equipment devices that have established a connection with the Packet Switched network.
Number of UEs with IuCS connection	The total number of User Equipment devices that have established a connection with the Circuit Switched network
Number of UEs with IuPS and IuCS connection	The total number of User Equipment devices that have established connections to both the Packet Switched and Circuit Switched networks.
Number of Idle UEs	The total number of User Equipment devices that have no active connections to either the Packet Switched or Circuit Switched networks.

Field	Description
HNBGW Service	The name that identifies this HNB-GW service.
Number of registered HNBs	The total number of HNB devices registered with this HNB-GW service.
Number of registered UEs	The total number of User Equipment devices registered with this HNB-GW service.
Number of UEs with IuPS connection	The total number of User Equipment devices that have a Packet Switched network connection to a SGSN via this HNB-GW service.
Number of UEs with IuCS connection	The total number of User Equipment devices that have established a Circuit Switched network connection to a MSC via this HNB-GW service.
Number of UEs with IuPS and IuCS connection	The total number of User Equipment devices that have established Packet Switched (SGSN) and Circuit Switched (MSC) network connections via this HNB-GW service.
Number of Idle UEs	The total number of User Equipment devices that do not have an active connection to a Packet Switched (SGSN) or Circuit Switched (MSC) network.

Field	Description
HNB Id	The HNB device ID sent to the HNB-GW during registration.
Number of registered UEs	The number of User Equipment devices that have registered with this HNB.
Number of UEs with IuPS connection	The number of User Equipment devices that have established a connection to a SGSN via the Packet Switched network.
Number of UEs with IuCS connection	The number of User Equipment devices that have established a connection to a MSC via the Circuit Switched network.
Number of UEs with IuPS and IuCS connection	The number of User Equipment devices that have established connections to an MSC via the Circuit Switched interface and an SGSN via the Packet Switched network.
Number of Idle UEs	The number of User Equipment devices that do not have an active connection to Packet Switched (SGSN) or Circuit Switched (MSC) networks.

Field	Description
Service name	The name used to identify the HNB-GW service to the system.
Context name	The name of the system context in which the HNB-GW service is defined.
SCTP IP Address	The IP address used to transmit SCTP messages from HNBs to the HNB-GW.
SCTPPort	The HNB-GW uses this port to listen for SCTP messages from HNBs.
GTP-U Service	The defined GTP-U service name(s) associated with the HNB-GW service in a Packet Switched network instance. The GTP-U service(s) are used for GTP-U tunneling towards the HNB-GW access network.
RTP IP Address	This is the IP address used in the RAB request by the HNB-GW as the transport layer endpoint. The HNB will send RTP data (packetized voice) to this IP address.
RTPPort Min	The lesser of two port numbers that define the RTP port range used in the binding-id in the RAB request sent to the HNB by the HNB-GW during voice call setup.
RTPPort Max	The greater of two port numbers that define the RTP port range used in the binding-id in the RAB request sent to the HNB by the HNB-GW during voice call setup.
RTP MUX	Indicates if RTP multiplexing is enabled or disabled. If enabled, multiple subscriber voice packets can be multiplexed and sent as one RTP packet towards the HNB-GW. This is explicitly negotiated between the HNB and the HNB-GW during HNB Registration.
HNBGW Initiated Ranap Reset	Indicates if the HNB-GW Initiated RANAP Reset function is enabled or disabled.
Ranap Reset Ack Timer	The timer value, in seconds, that defines how long the HNB-GW waits for a RESET ACK message from the SGSN or MSC after transmitting a RESET message. This setting is used only if the HNBGW Initiated RANAP Reset function is enabled.
Ranap Reset Maximum Retransmissions	Sets the maximum number of retries allowed for the HNB-GW to transmit a RANAP RESET message to the SGSN or MSC if the RESET ACK timer expires. This setting is used only if the HNBGW Initiated RANAP Reset function is enabled.
Ranap Reset Guard Timer	The timer that the HNB-GW starts after receiving a RESET message from the core network. While this timer is running, the HNB-GW discards any new RESET messages that it receives.
Available Radio Network PLMN	The Public Land Mobile Network ID configured for this HNB-GW service. It consists of the MCC and MNC (see below).
MCC	The Mobile Country Code defined for use with this HNB-GW service. It consists of the first 3 digits of the Available Radio Network PLMN ID.
MNC	The Mobile Network Code defined for use with this HNB-GW service. It consists of the last 3 digits of the Available Radio Network PLMN ID.
RNC-Id	The Radio Network Controller ID provided to HNBs for use by the core network for this HNB-GW service. It is configured under the PLMN-ID
Lac	The defined Location Area Identifier provided to HNBs during registration with this HNB-GW service. The LAC signifies which location area this HNBGW service belongs to, and is configured under the PLMN-ID.
Rac	The Routing Area Identifier provided to HNBs during registration with this HNB-GW service. The RAC signifies the routing area that this HNBGW service belongs to and is configured under the PLMN-ID
PS Network Name	The PS-network to be used for selecting the packet-switched core-network (i.e., SGSN) and its point-code.
CS Network Name	The CS-network to be used for selecting circuit-switched core-network (i.e., MSC) and its point-code.
Service Status	The current operating status of this HNB-GW service. If the status does not read ‘enabled’ HNB-GW functionality is not available.
Security GW service Address	The IP address of the HNB-Security Gateway associated with this HNB-GW service. Security Gateway configurations are used when the IPsec GW is co-located with the HNB-GW service on the ASR 5000. If the services are co-located, the SeGW IP address will be used as the IPsec tunnel endpoint by HNBs.
Crypto-template	Specifies the Crypto-Map template being used by the HNB-GW service for secure IPsec IKEv2 tunneling for the configured Iuh (HNB to HNB-GW) interface. The Crypto-Map template is used only if the HNB-GW and SeGW are co-located on the ASR 5000.